For a toilet to function properly, water should always be available such that each time you flush the toilet tank quickly refills itself ready for the next flush.

When the tank is not working, you can manually flush toilet by pouring a bucket of water directly into the bowl to wash away the waste down into the drains. If your tank is okay but it s water, simply pour water into it from a how to flush a toilet manually supply and flush. If the chain is broken or stuck try to pull the manuallly flapper to allow release of water into toilft how to flush a toilet manually.

Whichever the case, you will still need water to flush your toilet. It is almost impossible to flush a toilet without water supply. It is the water that will dissolve the waste and make it easy to flow down the trap into the pipes. Following are details on the steps to follow when the water supply to your toilet is shut or when your handle is not working or the tank has issues from inside.

This method is ideal if your tank is broken or faulty. Of course, the most obvious fix is to repair or replace the broken tank but you may not be in a position to do so. All you need is to directly pour the water into the toilet bowl.

Generally, you need between one to two gallons of water for every time you flush the toilet. How much water for a manual flush will depend on the type of toilet and the amount of waste manulaly your bowl…more waste will require more water. You may also need more water if your toilet is already clogged. This ideal when your tank is working properly but how to flush a toilet manually supply is shut off.

Depending on the model of the toilet you have in your possession, the amount of water needed to fill up the toilet tank will differ. Some toilets will take about one and a half gallons while others might take much more or even less. Another workaround, if only the handle has broken or fallen off, is to grip the stub it was on using a plier-like tool. Be cautious not to crush the teeth on the stub, you will most likely want to still fit a brand new handle.

Note that it will depend on the type how to flush a toilet manually toilet in your household. Some toilet types come fo flush buttons instead of arm levers…they may require different how to flush a toilet manually. All you need is to locate the flapper and pull it up. The rubber flapper in your toilet tank plays a vital role in your toilet flushing. If the chain is broken, the flapper can help.

Before you replacing the chain, you can try pulling it up manually to flush the toilet. The bucket method is another alternative. Simply pour a bucket of water directly into the bowl as outline in method 1 above. All the methods above can help to flush your toilet manually but how to flush a toilet manually should treat them as temporary fixes. Replacing or repairing the faulty parts is the best and long-term solution. Do not be afraid to seek help from pro plumber in your local area.

As an Amazon Associate, we may earn an affliate commission whenever you purchase through links fluwh our pages.

Disclosure here. Contents show.

3 Ways to Manually Flush a Toilet - Categories

If your toilet handle is broken or missing, you can still flush your toilet. This will release the water down into the bowl, flushing the toilet. Typically, the flapper can be lifted by removing the toilet tank cover and tugging on the chain that runs from the toilet handle lever down to the top of the flapper. If this chain is broken or disconnected, you can simply reach down and flip the flapper up with your hand. You can flush a toilet manually.

A toilet is a simple and effective device. It flushes once a large amount of water is released into the bowl. Gravity and the weight of water then carry the water and waste down into pipes below. Because toilets are simple, gravity-fed appliances, you can use several methods to flush them manually, with no tools required. You can still flush your toilet until you get the chance to repair or replace the handle. Try these methods in the meantime to keep your toilet usable.

The first step to flushing a toilet with a broken handle is to remove the lid from the toilet tank the water reservoir where the handle is located. From there, find the flapper. The flapper is a rubberized stopper usually red in color at the bottom of the tank.

It hinges open to allow the water supply to flush down through an opening and into the bowl. There should be a chain running from the flapper to the handle lever on the inside of the tank. You can lift the flapper and flush the toilet by pulling this chain upward. If the chain is not connected to the flapper, you will have to reach down into the toilet tank and lift the flapper. The water in your toilet tank is the same water that comes from your tap.

It contains no waste. In the case of a toilet tank with little or no water supply, use one of the following methods to flush it manually. Toilets are operated by gravity, remember? All your toilet handle does when you turn it is tug on the chain inside the tank and lift the flapper. This releases a large amount of water into the bowl at once.

From there, gravity flushes everything down the pipes. You can skip straight to the punch by simply pouring a large volume of water directly into the bowl, flushing the toilet. To do so:. By pouring a few gallons of water into the toilet bowl over the course of 5—10 seconds, you will create enough pressure that the water will be pulled down by gravity, flushing your toilet. This method can be used even if there is no running water.

Similar to pouring water directly into the bowl, you can use a bucket of water to fill the toilet tank. Then, follow the steps in method 1 to tug on the chain, lift the flapper, and flush. Again, this method can be used in instances where there is no running water or if the flapper is not forming a tight seal during normal operation.

You can use a nonfunctional toilet in this way until you have the opportunity for more complete repairs. A broken or detached chain in the toilet tank is a common problem. It renders your toilet handle useless.

However, you can still flush a toilet with a broken chain. All you need to do is remove the toilet tank lid, reach down to the bottom of the water tank, and lift the flapper. Chains can slip off their lever, break, or tear free from the flapper. If any of these is the case, either re-attach the chain or replace the broken component.

Once you have a chain running from the interior lever down to the top of the flapper, your flush handle will function normally again. Just be sure to turn off the water to the toilet and flush it before making any repairs. This method of manually flushing a toilet will work in all instances where you have running water and a working flapper.

Search Search for: Search. Table of Contents. Close Search for: Search.

How to flush a toilet manually. How to Flush a Toilet Without the Handle [3 Foolproof Methods]

It is still possible to flush a toilet when the handle is broken. Doing this will result in an immediate release of water into the toilet bowl which will then flush down its contents. In most cases, lifting the flapper is as simple as opening the toilet tank and tugging on the chain that connects the flapper with the handle lever.

If this chain is disconnected or broken, one can simply reach down and pull the flapper by hand. Yes, you can. This sanitary fixture is a simple yet very effective device. Once a large amount of water is transferred from the tank to the bowl, the toilet flushes and thus eliminates human waste and toilet paper in a quick and efficient manner. In other words, the homeowner only has to press down on the handle and the combo of gravity and the weight of the water will do the rest.

However, as stated above, these fixtures are simple, gravity-fed appliances, and can be flushed even when their handles are broken. Knowing its role should help you successfully replicate its mechanism in use.

The flushing mechanism inside most toilets works by operating several levers inside the tank. The entire process starts when the user moves the toilet handle in the right position. This allows water to flow from the tank to the bowl. Once the user lets go of the handle, the tilt lever will open up a component called a ball valve.

This will allow new water to enter the toilet tank under big pressure and refill it completely. The float stops the water supply once the water reaches the desired level. After that, the user can flush the toilet once again. In the meantime, give the following three methods a try:. And once you open this water reservoir, you will have to locate the flapper inside of it. The flapper hinges open in order to let the water get inside the bowl and flush away its contents. Check out this post on parts of the toilet tank for more help.

In most toilet tanks, the handle lever and the flapper are connected by a chain. By pulling this chain upward, you can lift the flapper and, in that way, flush a toilet that cannot be flushed regularly due to a broken handle. As I already said, in the case of a chain not being connected to the flapper, one has to lift the flapper manually, which requires reaching down into the toilet tank.

If the water level inside the tank is low or if it contains no water at all, refer to one of the methods described below. As stated above, toilets are operated by gravity. When used, all that the toilet handle does is pull on the aforementioned chain which, in turn, lifts the flapper.

The consequence of this action is a release of water from the tank into the bowl, which then results in a siphoning action that takes away the waste. You can skip to this last part by simply pouring some water into the toilet bowl. There is a time window of about seconds during which you have to pour a sufficient amount of water into the bowl to create enough pressure to trigger the siphoning action. A few gallons of water should be more than enough for this.

A lot of homeowners prefer this method for a couple of good reasons. It offers more control as it allows you to pour the exact amount of water your toilet needs for a successful flush. Again, you can resort to this method if you ever find yourself in a situation where there is no running water in your household.

A nonfunctional toilet can be easily flushed in this way until you get a chance to repair it. A detached or broken toilet tank chain is a very common issue. As you can already guess, a problem of this type makes the toilet handle completely useless.

Fortunately, however, it is still possible to flush a toilet whose chain is broken. The chains that are situated inside toilet tanks can easily tear free from the flapper, slip off their levers, and even break sometimes. If anything like this happens, the chain will need to be re-attached or replaced completely. Before you make any repairs, however, make sure to flush the toilet first and turn off the water supply. Check out this post on how to flush a toilet without water as well. And if you would like to avoid these problems altogether in the future, consider getting an incinerator toilet.

This method is not as messy and it will also allow you to check whether the chain inside the tank is unhooked or broken. Read more. Scroll to Top.